Comet – CAA-500MarkII – 1.8-500MHz Graphic and analog antenna analyzer

1.8-500MHz Graphic and analog antenna analyzer CAA-500MARKII SWR/Impedance Analyzer Highly accurate analog cross needles display SWR and impedance simultaneously. Full color TFT LCD display screen provides graphic and numerical SWR along with total impedance with R and X values. Features: AUTO SWEEP MODE Automatically graphs the SWR on the LCD display. Choose any one of the pre-set amateur band frequency ranges and press the sweep button…in about 30 seconds the SWR graph is completed. MANUAL SWEEP MODE Choose the band, manually set the band-width you desire, then manually sweep the chosen frequency range. MULTIPLE MANUAL SWEEPS Should you want to make an adjustment to the antenna length, the position, height above ground, a gamma match adjustment, etc… you can overlay multiple manual sweep results in 5 different colors! Instantly graph and see exactly what happened after each adjustment! Range: 1.8 – 500MHz (including 222MHz band) RF output level: 0dBm 1 mW Measured SWR Range: Analog meter 1.0 – 6.0:1 , LCD display 1.0 – 9.9:1 Impedance measurements: 12.5-300 ohms Reactance range: 0 – 500 Ohms (absolute value) 1.8 -190MHz Battery indicator and selectable Auto-Power-Off timer Operates up to 9 hours continuous using six AA Alkaline or NiMH cells (not included) or use an external 8-16VDC 200ma power source (DC cable included) Internal trickle charger option when using NiMH batteries Size: 3.5 x 7.75 x 2.65 inches (overall) Weight: 2 lbs 2 oz with alkaline batteries installed Available from all major Ham Radio Dealers in the US The CAA-500MarkII is the primary tool for any antenna adjustment or diagnostic project. Specifications subject to change without notice